|
Products-Page 3 |
|
|
Boiler
Klenz-2146
- Off-line
cleaning agent, boiler systems.
For
use in Boilers, Condensate tanks, Condensers, Chillers, Cooling Towers,
Piping, anywhere cleaning is warranted before starting up a system. Boiler
Klenz-2146, effective in removing heavy oil and grease accumulations, used
in concentrated form in removing mill scale, lighter soils, waxes, dirt, gums,
soaps, cutting and process oils, coal dust and other contaminants.
No
Dispensing Equipment Required.
|
|
|
Boiler
Passivator -
2147 - Wet
lay up corrosion Inhibitor
Controls
oxygen incursions in feedwater tanks, feedwater lines, flooded pumps,
boiler drums and economizers. Boiler Passivator, a unique blend of Sulfite
and supplemental corrosion control agents designed to protect ferrous
metals during dormant equipment lay up periods. Boiler
Passivator-2147 prevents corrosion problems from pitting and grooving due to dissolved gases
during the wet lay up of a boiler. No Feed Equipment Required.
|
|
|
DispersionGard
2148- BioDispersant/Organic Penetrant
Penetrating action of DispersionGard-2148 results in the sloughing off and
dispersal of the organic matrix that results in poor heat transfer,
microbiological fouling and increased treatment demands. Consistent use of DispersionGard-2148 will help remove deposits and
maintain corrosion free surfaces. DispersionGard-2148 will assist in
cleaning heavily fouled systems before application of TowerGard or any of
the BioLogic
products.
|
|
|
PHLogic
1- 2160 - pH Reducing Agent/Acid Descaler
pHLogic I
can be utilized for reducing the pH of a cooling
water system, which
retards the scaling potential of the
water. pHLogic I will allow for
increased performance of dispersants or micro biocides especially where
halogenated compounds are used. pHLogic I can be
utilized as a cleaner to de-scale systems fouled with
Calcium
Carbonate or other scaling ions. Dispense with GardIon Delivery System.
|
|
|
LoopGard-2171
- Closed System Treatment (Nitrite Based)
Specifically
designed for application to chill or hot water closed loop systems. Efficient heat transfer with clean surfaces combined with minimal
corrosion rates can be achieved with LoopGard-2171. LoopGard 2171 contains
Ferrous corrosion inhibitors as well as dispersants for
calcium carbonate and iron as well as pH buffering capacity. LoopGard 2171, compatible with Ethylene/Propylene Glycol. No Feed Equipment required.
|
|
|
LoopGard-2174
- Closed Loop
Treatment (Environmentally Friendly!)
Does
not contain Nitrite, Molybdate or similar restricted entities
for discharge to POTW or SARA title III inclusions. Efficient heat
transfer, clean surfaces combined with minimal corrosion rates are
achieved with the use of LoopGard 2174. LoopGard 2174 controls ferrous
& non-ferrous corrosion processes, providing an ionic barrier on metal
surfaces, diffusing the ability of oxygen or other corrosion processes.
No Feed
Equipment.
|
|
|
#6000
Series GardIon Delivery and Injection Systems
- Singular Product
Singular
product dissolution systems ready for quick mounting to almost any wall
surface. Any #6000 GardIon
series system takes up only 24" x 32" with all of the required
dissolution features pre-mounted facilitating quick and easy installation
in almost any location even where space and accessibility are at a
premium. Complete with a single dissolution chamber, product reservoir,
back-flow prevention, reduction to 24 volt electrical wiring, as well as a
safety control float and allied items.
|
|
|
6101T
- GDS TowerGard CPP
-
Battery
Mount
the unit on the side of the cooling tower, put the foot valve in the sump.
set the battery-operated timer, place the chemical exit line into
the sump!
A
new and economical way to treat swamp coolers and small cooling towers of
up to 100 tons. The six-volt battery system operates a peristaltic pump
that uses tower water to dissolve the TowerGard
CPP mini-block. As the
TowerGard CPP mini-block dissolves it gravity feeds product to the tower.
|
|
|
6110
- BIO GardIon System- Battery (2117 &
2112 Products)
Mount
the unit on the side of the cooling tower, put the foot valve in the sump.
set the battery-operated timer, place the chemical exit line into
the sump!
A
new and economical way to treat swamp coolers and small cooling towers of
up to 100 tons. The six-volt battery system operates a peristaltic pump
that uses tower water to dissolve the BioLogic
cartridge. As the BioLogic
dissolves it gravity feeds product to the tower.
|
|
|
Mount
the unit on the side of the cooling tower, put the foot valve in the sump.
set the transformer-operated timer, place the chemical exit line
into the sump!
A
new and economical way to treat swamp coolers and small cooling towers of
up to 100 tons. The transformer system operates a peristaltic pump that
uses tower water to dissolve the BioLogic
cartridge. As the BioLogic
dissolves it gravity feeds product to the tower.
|
|
|
#6200 GardIon
Delivery and Injection Systems
DUAL
product dissolution systems ready for quick
mounting to almost any wall
surface. System takes up
only
24" x 42" with all of the required dissolution features
pre-mounted facilitating quick and easy installation in
almost any
location even where space and accessibility
are at a premium. Complete
with DUAL dissolution
chambers, product reservoirs, back flow prevention,
reduction to 24 volt electrical wiring, as well as a safety
control floats
and allied items.
|
Send mail to